[Tig] Topazio's BRRE lab & 3D projection
Wed Jul 27 17:43:56 BST 2005
Losses due to 3D shutter glasses require extra light. For the NFT demo we set 28ftL which was easy with the ~30ft screen, based on 14ftL per eye (half the time). In fact the glasses have a slight transmission loss in the 'off' state as well as not being true neutral density, although this can be compensated for in the projector.
Next time I will put the 3D specs on the colour light meter when setting up and make it easy :-)
Bell Theatre Services Ltd
From: Peter Swinson [mailto:peter_swinson at compuserve.com]
Sent: 27 July 2005 16:50
Subject: [Tig] Topazio's BRRE lab & 3D projection
Thanks to Edifis Media Tech for supporting the TIG
I note that Bill Topazio has produced a mobile BRRE lab. While the image
quality would not allow full resolution it appeared that the lab was at the
endian point as all 734 beer containers appeared to be empty. The
researcher Bill and his assistant MK, or is she 4K, allegedly spent 3 weeks
BRRE experimenting. Now that works out at about 1 gallon each per day.
Studying the photo, this has had no effect on his assistant, however Bill
himself has taken the form of a tea-pot, requiring stabilization with a
bungee cord at the spout. I also assume the head bandage is to prevent the
animal stuck to his head from making it's escape.
Well done Mr Topazio and MK, you are martyrs to the cause.
My UK BRRE's are presently on hold. However 2 week vacation cruising from
pub to pub along the English river Cam & Ouse looms and I am sure that
subsequently I shall be able to report on never seen before results.
BTW how many of you have seen the 3D created version of the original Star
Wars? It used 3D Dimensionalisation which I believe was conceived by Mike
Kaye who was for many years at Encore. I know it's only reel 1 but I found
it quite amazing. I saw it at the UK NFT via a Digital Cinema projector
running at 96fps, 48 fps each eye sequentially. Certainly no flicker and
brightness was good, probably because the lamp could be cranked up to
offset the losses in the LCD switching glasses.
participate in the tig wiki pages at http://tig.colorist.org/wiki
Tig mailing list
Tig at tig.colorist.org
More information about the Tig