[Tig] Smoke Archiving Issues

Ian Richardson irichardson at cuttingedge.com.au
Thu Apr 17 23:30:56 BST 2008

Hi Leo

Make sure  input Rounding is set to simple [menu 707]
and 775 to 8 bit
and VT in EE Smoke in and out connected

good luck 
Ian Richo

-----Original Message-----
From: tig-bounces at tig.colorist.org [mailto:tig-bounces at tig.colorist.org]
On Behalf Of Leo Liao
Sent: Thursday, 17 April 2008 8:24 PM
To: tig at tig.colorist.org
Subject: [Tig] Smoke Archiving Issues

1826 subscribers as of April 2008
Gary Adams supports the TIG

We try to archive one HD project in our Smoke2007 into the Sony HDcam
F500, we are using 24psf, and F500 using the input as its reference, but
when we want to format the tape, there is a error message:
CLIP MGT: Format failed, Video signal too dirty.
The cables between smoke and F500 is straight, no patchbay.

I do not know what is wrong with them, smoke or F500?
No personal abuse; absolutely no advertising or marketing on the main
TIG mailinglist.  Emergency
tig contact address is rob (at) calarts.edu
Tig mailing list
Tig at tig.colorist.org

More information about the Tig mailing list