[Tig] Blackmagic DaVinci Resolve Droping Near Cut on Big Project

Isabell Brockmann contact at ib-creative.de
Tue Oct 14 22:13:37 BST 2014


Hallo,

bin bis Montag dem 20.10.2014 wegen einer Beerdigung in England.
In dringenden Fällen unter +49 176 89086778 anrufen. 
Melde mich dann zurück.

Liebe Grüsse 
Isa*

Am 14.10.2014 um 00:31 schrieb Tom Rovak via Tig <tig at colorist.org>:

> Sohonet www.sohonet.co.uk sponsors the TIG.
> RushTera www.RushTera.com supports the TIG.
> =====
> 
> 
> BTW Resolve does not move or copy the media to the media pool. It basically points to the media and uses it on the drive/storage network it lives on. 1TB or 50TB should really not have any effect on Resolve's performance. I have had SANs with hundreds of TBs and that makes no difference. Sometimes it's the drive itself that alters performance. I would start by looking at the drive, and connection. I seriously doubt this is a Resolve problem you are having. 
> These other tools are for managing projects and are good practice for that. 
> 
> 
> Tom Rovak - Executive Producer / Sr. Colorist / Post Production Supervisor 
> ROVAK COLORIST SERVICES 
> A Division Of The Annex Studios 
> Commercials, Feature Films, Music Videos, Long Form 
> Color Correction, Dailies, Editorial, Finish/VFX 
> trovak at comcast.net 
> (815)690-8323 
> Website / Commercial Reel: http://colorist-rovak.com/ 
> 
> ----- Original Message -----
> 
> From: "tig" <tig at colorist.org> 
> To: "Marc Wielage" <mfw at musictrax.com> 
> Cc: "Group, Telecine" <tig at tig.colorist.org> 
> Sent: Monday, October 13, 2014 5:07:30 PM 
> Subject: Re: [Tig] Blackmagic DaVinci Resolve Droping Near Cut on Big Project 
> 
> Sohonet www.sohonet.co.uk sponsors the TIG. 
> RushTera www.RushTera.com supports the TIG. 
> ===== 
> 
> 
> This can also be done by starting with a new session (empty media pool), set up a bin for each reel, input the XML for reel 1 and check the box to ingest the select clips to the media pool. Move on to reel 2 etc… 
> I use this when I have a locked cut. When I don't have a locked cut yet, I will bring all media into the media pool. Importing new XMLs as I get them. I have had some projects with up to 16TB and have never had a problem, slow down etc... 
> Not sure what could be causing that. 
> 
> Tom Rovak - Executive Producer / Sr. Colorist / Post Production Supervisor 
> ROVAK COLORIST SERVICES 
> A Division Of The Annex Studios 
> Commercials, Feature Films, Music Videos, Long Form 
> Color Correction, Dailies, Editorial, Finish/VFX 
> trovak at comcast.net 
> (815)690-8323 
> Website / Commercial Reel: http://colorist-rovak.com/ 
> 
> ----- Original Message ----- 
> 
> From: "tig" <tig at colorist.org> 
> To: "Hebert Marmo" <hebertmarmo at gmail.com> 
> Cc: "Group, Telecine" <tig at tig.colorist.org> 
> Sent: Monday, October 13, 2014 4:43:10 PM 
> Subject: Re: [Tig] Blackmagic DaVinci Resolve Droping Near Cut on Big Project 
> 
> Sohonet www.sohonet.co.uk sponsors the TIG. 
> RushTera www.RushTera.com supports the TIG. 
> ===== 
> 
> 
> On 10/12/14, 5:08 PM, "Hebert Marmo via Tig" <tig at colorist.org> wrote: 
> 
> 
> I am guessing it's 
> because of the size of the quicktime files on the second day, the most 
> present on the cut, the 18 ki-pros recorded aprox 3 hours and 20 minutes, 
> each. This project is using 10 TB of my storage. Did anyone had a similar 
> issue with big projects? 
> -------------------------------------------------------- 
> 
> I agree with Joe & Patrick: you need to delete the unused media from the 
> session so that the only media you have to deal with is the actual shots 
> used in the video. 
> 
> Nikolai Waldman¹s ³Resolve Collect² is an inexpensive add-on that will let 
> you sort out the used source files from the unused source files: 
> 
> http://www.niwa.nu/resolve-collect/ 
> 
> I recently did a project that shrank from 7TB to 1.2TB, since I was able 
> to corral just the clips actually needed for the project. 
> 
> ‹Marc W. 
> 
> 
> 
> _______________________________________________ 
> http://colorist.org 
> To change subscription options, see http://tig.colorist.org/mailman/listinfo/tig 
> 
> _______________________________________________ 
> http://colorist.org 
> To change subscription options, see http://tig.colorist.org/mailman/listinfo/tig 
> 
> _______________________________________________
> http://colorist.org
> To change subscription options, see http://tig.colorist.org/mailman/listinfo/tig


More information about the Tig mailing list