[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
At Postique we use over-the-top capstan wrap. Our machine is the original
Jump-Free demonstration Ursa from NAB '92 floor. At commissioning we were
told to use over-the-top for improved stability by Rank folks. Indeed, the
vertical stability is improved with the minimal wrap, *although*, the gate
exit roller did cause some scratching on a frame or two where the film
motion was reversed due to exit roller inertia and small film contact area
We tried a deep cut exit roller for a while, but now run sans gate exit
roller. The over-the-top wrap now works well for us with no ill effects.
Subj: Re: over the top or omega?
Date: 95-03-17 19:17:40 EST
From: telecine at xyzoom.alegria.com
To: telecine at xyzoom.alegria.com
CC: bt at univid.com