[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: a few issues from Dave Corbitt
On issue #1
What many of my clients are using is the Tektronix WFM-601 and WFM-601i
serial/parallel component digital waveform monitor and the "diamond
display" feature in this unit. This feature in the WFM-601 was designed
for just this situation and to my knowledge, it delivers.
It will show you, (tell you if you hook up and activate the alarm), when
you have exceeded NTSC legal gamut limits for encoding.
Outside of the NTSC artifacts related to encoding itself (bandwidth,
serration, filtering, etc.), it's WYSIWYG.
I was hoping to put this unit into Hollywood Digital's telecine and
component digital edit bays when I was the Project Engineer for HD. It
just was not available at the time and I had to design other waveform
Current facilities that I have been working with who are TOTALLY COMPONENT
DIGITAL who are using the WFM-601 and 601i are C|Net Central, and The Game
Would like to hear from other users of the WFM-601 on this issue.
Hope this helps.
Digital Production Systems
______________________________ Reply Separator _________________________________
Subject: a few issues from Dave Corbitt
Author: Rob Lingelbach <rob at xyzoom.alegria.com> at sonycom
Date: 5/15/95 3:17 PM
>Message was resent -- Original recipients were:
To:telecine at xyzoom.alegria.com---------------------------------------------
1. I'd like to know what various people are doing to limit D-1
signals to some kind of Legal Limits for eventual encoding? The issue
is related to clients wanting to control the color gamut displayed on
the Color Correction master monitor while in D-1 format so it doesn't
get modified downstream by being Proc'd to make it
broadcastable. Sorry for the run on sentence. I wasn't an English