[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Coments re: Film Reg.
- To: telecine at sun.alegria.com
- Subject: Re: Coments re: Film Reg.
- From: "Michael C. Kaye" <m.c.kaye at ix.netcom.com>
- Date: Fri, 01 Aug 1997 22:57:25 -0700
- Old-Return-Path: <m.c.kaye at ix.netcom.com>
- References: <l03020902b0085d9209b1 at [22.214.171.124]>
- Resent-Date: Fri, 1 Aug 1997 23:00:20 -0700 (PDT)
- Resent-From: telecine at sun.alegria.com
- Resent-Message-ID: <"hjGiTC.A.hNE.tzs4z" at sun>
- Resent-Sender: telecine-request at sun.alegria.com
- Resent-To: multiple recipients of <telecine at sun.alegria.com>
grant.petty at digitalvoodoo.net wrote:
> What would be nice, is if on the AATON cameras they could blink one of the
> light emitting diodes that generate the Aaton codes, when the film is held
> still during the exposure. If they did this on each frame, then the
> telecine manufactures could build a system to look for this dot and then
> use it as a stabilisation reference. It would then cancel out the
> instability in both the camera and the telecine.
This has been done by 'Goldmark' back in the 50's.
Unfortunately, I had reason (years ago) to have to review
over 100 patents relating to stabilizing anything flat with
holes in it.
> AATON could just do it, most likely with just a software change, and then
> when the telecine guys get around to supporting it, then it might work.
> It is getting late, (3:40am) and I have not really thought about this
> properly, but I thought that It might be interesting idea.
> Anyone care to comment?
If this were the case you would then be restricted to stabilizing
only the film that was photographed with that process.
mailinglist digest available......posting guidelines on the webpage
the Telecine Internet Group <http://www.alegria.com/telecinehome.html>