[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

DCT question from CML

Here on the TIG is a question from the CML about DCT to PAL or NTSC.
If I could add more acronyms I would.

----------forwarded message from jeffkreines at mindspring.com follows:

From: Jeff Kreines <jeffkreines at mindspring.com>
To: "David Mullen" <davidm2 at earthlink.net>,
        "Cinematography List" <CML at cinematography.net>
Sender: owner-cml at cinematography.net

The Ampex DCT tape format can lay down a film at 24 fps without pulldown, 
nearly uncompressed, in such a way that you can then extract clean PAL 
and NTSC versions from it.  Many post facilities use this and like this 
tape format.

Perhaps someone here from the TIG (Rob, Jean, someone) could elaborate.

Jeff Kreines

Thanks to John Seberg and Don Ver Ploeg for supporting the TIG in 1998.
No product marketing allowed on the main TIG.  Contact rob at alegria.com
1003 subscribers in 38 countries on Tue Jun 23 20:03:55 PDT 1998 
subscribe/unsubscribe with that Subject: to telecine-request at alegria.com
complete information on the TIG website http://www.alegria.com/tig3/